Home > Vintage Air
New Products Coming Soon.  Check back later.
Sort By:
1
Vintage Air 491210-RUA Gen IV Polished Horizontal Control Panel Vintage Air Gen IV SureFit Complete System Kit 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 Chevy / GMC Pickup Truck Without Factory AC 941164 Vintage Air Gen IV SureFit Complete System Kit 1964 1965 1966 Chevy / GMC Pickup Truck Without Factory AC With Deluxe Controls No Compressor or Brackets
Vintage Air 491210-RUA Gen IV Control Panel Horizontal Polished. Product Dimension (LxWxH): 6.3x5.8x3.4.
Gen II ComPac - Heat Cool and Defrost

Our proven Gen II servo motor control technology makes this mid-sized package work better than many other's full-size systems! Three outlet vents allow you to position your louvers wherever you need them. The Gen II ComPac is an ideal system for coupes classic trucks and smaller sedans.

Air Conditioning Evaporator Length:20.500 in.

Air Conditioning Evaporator Height:9.000 in.

Air Conditioning Evaporator Depth:7.750 in.

Number of Air Duct Outlets:3

Duct Hose Included:Yes

Control Panel Included:No

Heater Control Valve Included:Yes

Vacuum Control Included:No

Defrost Ducts Included:Yes


*There is a 15-20% restocking fee on this item.

The All-In-One Kit For Your Classic Chevy Truck!

Vintage Air SureFit air conditioning, heating and defrost systems for 1964-1966 Chevy trucks are designed specifically for each application. We match the coil and blower to give you the maximum amount of comfort in your vehicle, greater air flow than your OEM system provided, and still retain the factory look inside your vehicle. Factory non-air system heater controls are used.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.


Additional features include variable blower speed and dash/floor/defrost blend.

Gen IV SureFit System Features:
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite "just right temperature" air blending
- Infinite blower fan speed adjustment
- High volume dehumidified defrost mode
- Separate high capacity aluminum plate & fin cooling coil
- Copper/ brass Cuprobraze parallel flow heater coil
- Mounts behind dash
- New control panel included with our exclusive Electronic Cable Converters
- Flat steel firewall cover panel
- A/C exits through dash vents
- Floor exit heat

Includes:

** Non Complete kits include everything in the evaporator kit plus all under-hood components such as condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

  • Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
  • Infinite just-right-temperature air blending
  • Infinite blower fan speed adjustment
  • High-volume dehumidified defrost mode
  • Separate high-capacity aluminum plate & fin cooling coil
  • Copper/brass CuproBrazeā„¢ parallel-flow heater coil
  • Mounts behind the dash
  • Uses your factory system controls with our patented Electronic Cable Converters
  • Flat steel firewall cover panel
  • Replacement molded glove box (reduced capacity)

NOTES:
Some installations may require additional engine pulleys not included with kits. You must provide pulleys, v-belts and refrigerant.

(Complete kit pictured, some components may vary based on model.)

*There is a 15-20% restocking fee on this item.
Vintage Air Gen IV SureFit Complete System Kit 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 Chevy / GMC Pickup Truck with Factory AC Vintage Air Gen IV SureFit Complete System Kit 1967, 1968, 1969, 1970, 1971, 1972 Chevy / GMC Pickup Truck with Factory AC 1970 1971 1972 chevy chevelle sure fit ac kit vintage air kit
The All-In-One Kit For Your Classic Chevy Truck!

Vintage Air SureFit air conditioning, heating and defrost systems for '73-'80 Chevy trucks are designed specifically for each application. We match the coil and blower to give you the maximum amount of comfort in your vehicle, greater air flow than your OEM system provided, and still retain the factory look inside your vehicle. Factory non-air system heater controls are used.

Gen IV SureFit System Features:
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite "just right temperature" air blending
- Infinite blower fan speed adjustment
- High volume dehumidified defrost mode
- Separate high capacity aluminum plate & fin cooling coil
- Copper/ brass Cuprobraze parallel flow heater coil
- Mounts behind dash
- New control panel included with our exclusive Electronic Cable Converters
- Flat steel firewall cover panel
- A/C exits through dash vents
- Floor exit heat

Includes:
* Mounting brackets
* Hardware
* Louvers
* Duct hose
* Wiring harness
* Installation instructions
* Evaporator
* Condenser
* Standard drier
* Compressor bracket
* Pre-formed aluminum lines
* Mounting hardware
* Hose kit
* Hi/low safety switch

NOTES:
Some installations may require additional engine pulleys not included with kits. You must provide pulleys, v-belts and refrigerant.

(Complete kit pictured, some components may vary based on model.)

*There is a 15-20% restocking fee on this item.
The All-In-One Kit For Your Classic Chevy Truck!

Vintage Air Sure Fit air conditioning, heating and defrost systems for '60-'72 Chevy trucks are designed specifically for each application. We match the coil and blower to give you the maximum amount of comfort in your vehicle, greater air flow than your OEM system provided, and still retain the factory look inside your vehicle. Factory controls are used.

Gen IV Sure Fit System Features:
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite "just right temperature" air blending
- Infinite blower fan speed adjustment
- High volume dehumidified defrost mode
- Separate high capacity aluminum plate & fin cooling coil
- Copper/brass Cuprobraze parallel flow heater coil
- Mounts behind the dash
- Uses your factory system controls with our exclusive Electronic Cable Converters
- Flat steel firewall cover panel
- A/C exits through dash vents
- Floor exit heat

Includes:
* Mounting brackets
* Hardware
* Louvers
* Duct hose
* Wiring harness
* Installation instructions
* Evaporator
* Condenser
* Standard drier
* Pre-formed aluminum lines
* Mounting hardware
* Hose kit
* Hi/low safety switch
* Compressor
* Compressor bracket

NOTES:
1.Some installations may require additional engine pulleys not included with kits. You must provide pulleys, v-belts and refrigerant.
2. We recommend using our heavy duty fan blade and a fan shroud. 320467-LCF 1967-72 Chevy truck Fan Shroud.



(Complete kit pictured, some components may vary based on model.)

*There is a 15-20% restocking fee on this item.
VINTAGE AIR 965071 A/C Complete Kit 70-72 Chevelle Factory Air Car. Dimensions in Inches (LxWxH): 42 x 42 x 18

Vintage Air SureFit air conditioning, heating and defrost systems for '70-'72 Chevelles are designed specifically for each application. We match the coil and blower to give you the maximum amount of comfort in your vehicle, greater air flow than your OEM system provided, and still retain the factory look inside your vehicle. Factory non-air system heater controls are used.

Gen IV SureFit System Features:
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite "just right temperature" air blending
- Infinite blower fan speed adjustment
- High volume dehumidified defrost mode
- Separate high capacity aluminum plate & fin cooling coil
- Copper/ brass Cuprobraze parallel flow heater coil
- Mounts behind dash
- New control panel included with our exclusive Electronic Cable Converters
- Flat steel firewall cover panel
- A/C exits through dash vents
- Floor exit heat

Includes:
* Mounting brackets
* Hardware
* Louvers
* Duct hose
* Wiring harness
* Installation instructions
* Evaporator
* Condenser
* Standard drier
* Compressor bracket
* Pre-formed aluminum lines
* Mounting hardware
* Hose kit
* Hi/low safety switch

NOTES:
Some installations may require additional engine pulleys not included with kits. You must provide pulleys, v-belts and refrigerant.

(Complete kit pictured, some components may vary based on model.)

*There is a 15-20% restocking fee on this item.
944175 Vintage Air Gen IV SureFit Complete System Kit 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 Chevy / GMC Pickup Truck Without Factory AC 941164 Vintage Air Gen IV SureFit Complete System Kit 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 Chevy / GMC Pickup Truck Without Factory AC
The All-In-One Kit For Your Classic Chevy Truck!

Vintage Air SureFit air conditioning, heating and defrost systems for '73-'80 Chevy trucks are designed specifically for each application. We match the coil and blower to give you the maximum amount of comfort in your vehicle, greater air flow than your OEM system provided, and still retain the factory look inside your vehicle. Factory non-air system heater controls are used.

Gen IV SureFit System Features:
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite "just right temperature" air blending
- Infinite blower fan speed adjustment
- High volume dehumidified defrost mode
- Separate high capacity aluminum plate & fin cooling coil
- Copper/ brass Cuprobraze parallel flow heater coil
- Mounts behind dash
- New control panel included with our exclusive Electronic Cable Converters
- Flat steel firewall cover panel
- A/C exits through dash vents
- Floor exit heat

Includes:
* Mounting brackets
* Hardware
* Louvers
* Duct hose
* Wiring harness
* Installation instructions
* Evaporator
* Condenser
* Standard drier
* Compressor bracket
* Pre-formed aluminum lines
* Mounting hardware
* Hose kit
* Hi/low safety switch

NOTES:
Some installations may require additional engine pulleys not included with kits. You must provide pulleys, v-belts and refrigerant.

(Complete kit pictured, some components may vary based on model.)

*There is a 15-20% restocking fee on this item.
The All-In-One Kit For Your Classic Chevy Truck!

Vintage Air SureFit air conditioning, heating and defrost systems for 1964-1966 Chevy trucks are designed specifically for each application. We match the coil and blower to give you the maximum amount of comfort in your vehicle, greater air flow than your OEM system provided, and still retain the factory look inside your vehicle. Factory non-air system heater controls are used.

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.


Additional features include variable blower speed and dash/floor/defrost blend.

Gen IV SureFit System Features:
- Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
- Infinite "just right temperature" air blending
- Infinite blower fan speed adjustment
- High volume dehumidified defrost mode
- Separate high capacity aluminum plate & fin cooling coil
- Copper/ brass Cuprobraze parallel flow heater coil
- Mounts behind dash
- New control panel included with our exclusive Electronic Cable Converters
- Flat steel firewall cover panel
- A/C exits through dash vents
- Floor exit heat

Includes:

**Complete kits include everything in the evaporator kit plus all under-hood components such as compressor engine brackets condenser with brackets preformed refrigerant lines drier fittings hardware and installation instructions.

  • Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route
  • Infinite just-right-temperature air blending
  • Infinite blower fan speed adjustment
  • High-volume dehumidified defrost mode
  • Separate high-capacity aluminum plate & fin cooling coil
  • Copper/brass CuproBrazeā„¢ parallel-flow heater coil
  • Mounts behind the dash
  • Uses your factory system controls with our patented Electronic Cable Converters
  • Flat steel firewall cover panel
  • Replacement molded glove box (reduced capacity)

NOTES:
Some installations may require additional engine pulleys not included with kits. You must provide pulleys, v-belts and refrigerant.

(Complete kit pictured, some components may vary based on model.)

*There is a 15-20% restocking fee on this item.
   
 
1